RAD Data comm ASMi-52 - Manual (Page 23)

Installation and Operation Manual Chapter 1 Introduction
ASMi-52 Ver. 2.5 Overview 1-7
Multiplexer Applications
• The multiplexer unit cannot be configured as a device with LAN only port. It
must have a DTE or IR port.
• The hardware of a single unit-based product with a LAN port manager is
different from that of a multiplexer-based product.
The hardware has different options for the modem to work as a multiplexer.
Table 1-4 shows all the available multiplexer combinations that can be used.
Software for a multiplexer version is available but is not transferable to a single port
unit.
Table 1-4. Possible Multiplexer Applications
CO/CPE E1 Serial DTE LAN
E1+Serial DTE E1+LAN
Serial
DTE+LAN
E1↔E1 E1↔E1 E1↔Serial DTE
E1↔Serial DTE
E1
E1↔E1 E1↔Serial DTE E1↔LAN
E1↔E1+Serial
DTE
E1↔E1+LAN
E1↔Serial
DTE+LAN
Serial DTE↔E1 Serial DTE↔E1
Serial DTE↔
Serial DTE
Serial
DTE
Serial DTE↔E1
Serial DTE↔
Serial DTE
Serial
DTE↔LAN
Serial DTE↔
Serial DTE
LAN ↔ E1 LAN ↔ E1
LAN ↔ Serial
DTE
LAN
LAN↔E1
LAN↔Serial
DTE
LAN↔LAN
LAN ↔ Serial
DTE
E1↔E1 E1↔Serial DTE E1↔LAN
E1↔ E1+Serial
DTE
E1↔E1 E1↔Serial DTE
Serial DTE↔E1
Serial DTE
↔ Serial DTE
V.35↔LAN E1↔E1
E1+Serial
DTE↔E1
E1↔Serial DTE E1↔E1+LAN
E1↔Serial
DTE+LAN
Serial DTE↔E1 Serial DTE↔E1
Serial DTE↔
Serial DTE
Serial DTE↔
Serial DTE
E1+Serial
DTE↔E1
E1+Serial
DTE
E1+Serial DTE
↔ E1+Serial
DTE
E1+Serial
DTE↔E1
Notes
Note