RAD Data comm ASMi-52 - Manual (Page 154)

Appendix B IR-IP Interface Module Installation and Operation Manual
B-18 Advanced Setup ASMi-52 Ver. 2.5
PPP Protocol Menu
The PPP Protocol Parameters menu is used to configure the parameters PPP WAN
for protocol (the WAN protocol is selected by means of the (the WAN protocol is
selected by means of the
Quick Setup ) in Figure B-5 .
To define the PPP Protocol Parameters:
1. From the Advanced Setup menu, type 3. A typical PPP Protocol Parameters
menu is shown in Figure B-12 .
2. Define the use of Header and Control Field Compression type according to
RFC 1661. It is strongly recommended that this compression be used for
troubleshooting only.
3. Define the use of Protocol Field Compression type according to RFC 1661. It
is recommended that this compression be used for troubleshooting only.
4. Select the Authentication Protocol used by an IP router configured as host to
validate incoming connections.
5. Configure the IP router Security Host/Guest parameter.
Guest unit, to be authenticated by another router
Host unit, that authenticates other routers.
6. Define the User Name To Send. An IP router card configured as guest
identifies itself by this name.
7. Define the Password To Send. The password by which an IP router card
configured as guest identifies itself.
8. Specify the User Name to Accept, by an IP router configured as host, when an
incoming connection request is received.
9. Specify the user password to be accepted by an IP router configured as host,
when an incoming connection request is received.
IR_IP <IR-IP> S/W Ver. 1.21 (date)
Quick Setup
Management Access
Advanced Setup
.....................................................................
Device identification
Interface Parameters
Protocol Parameters
=====================================================================
1. Header and Control Field Compression :[ No ]
2. Protocol Field Compression: :[ No ]
3. Authentication Protocol :[ NONE/NONE ]
4. Security Host / Guest :[ Guest ]
5. User Name To Send :.................
6. Password To Send :.................
7. User Name To Accept :.................
8. Password To Accept :.................
Press one of the numbers to select or ESC:
Figure B-12. PPP Protocol Parameters Menu