Configuration menus – RAD Data comm ASMi-52 User Manual

Page 47

Advertising
background image

Installation and Operation Manual

Chapter 3 Operation

ASMi-52 Ver. 2.5

Configuration Alternatives

3-11

• Trace – opens an additional pane for system messages, progress indicators

(ping, software and configuration file downloads) and alarms. It is
recommended to keep the trace pane open all the time.

• Refresh All – refreshes all screen elements.

Configuration Menus

The following is the menu map of the ASMi-52 management software.

Some of the management menu options depend on the type of the DTE interface
installed in ASMi-52:
DTS Configuration (Main menu > Configuration > System Configuration >

Management) is available only for the units with E1 or T1 interface.

LAN Rate (Main menu > Configuration > LAN Configuration > Local LAN

Configuration) is available for the units with the user’s 10/100BaseT port.

Data Rate (Main menu > Configuration > DTE Configuration > DTE Remote

Port) is available for the units with a serial DTE interface.

E1 Configuration (Main menu > Configuration) is available for the units with an

E1 local port.

Figure 3-10

illustrates software menus of the unit that operates with SHDSL

repeater in the line.

Note

Advertising