RAD Data comm ASMi-52 - Manual (Page 156)

Appendix B IR-IP Interface Module Installation and Operation Manual
B-20 Using the Device Control Menu ASMi-52 Ver. 2.5
To access the Static Groups menu:
1. From the Multicast IP menu, type 2.
The following screen appears:
IR_IP <IR-IP> S/W Ver. 1.21 (date)
Static Multicast Groups Table
-----------------------------
Group IP Address
1. ................
2. ................
3. ................
4. ................
5. ................
6. ................
7. ................
8. ................
9. ................
10. ...............
Press 'A'-add, 'E'-edit, 'D'-delete, 'C'-clear all, 'ESC'-exit:
Figure B-14. Static Multicast Groups Table
2. Add, change, or delete IP addresses in the table (see the prompt line).
B.10 Using the Device Control Menu
The Device Control menu is used to download software from TFTP servers and
perform interface and device resets.
To access the Device Control menu:
• From the Main menu, type 4.
The Device Control menu appears ( Figure B-15 ).
IR_IP <IR-IP> S/W Ver. 1.21 (date)
Quick Setup
Management Access
Advanced Setup
Device Control
----------------------------------------------------------
1. New Software Download
2. View error LOG
3. Erase configuration
4. Resets
Press one of the numbers to select or ESC:
Figure B-15. Device Control Menu