RAD Data comm ASMi-52 - Manual (Page 66)

Chapter 4 Configuration Installation and Operation Manual
4-16 Configuring ASMi-52 System Parameters ASMi-52 Ver. 2.5
Configuring Control Port Parameters
The embedded ASMi-52 software enables you to configure the Control port
parameters.
To access the Control port menu:
• From the System Configuration menu, select Control Port (Main menu >
Configuration > System Configuration > Control Port).
The Control Port menu appears (see Figure 4-20 )
ASMi-52
Control Port
1. Rate
>(9600 bps)
2. Interface (DCE)
3. CTS (=RTS)
4. DSR (DTR)
5. Port Control >
6. Save
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-20. Control Port Menu
Changing the Control Port Data Rate
The control port of ASMi-52 supports different data rates that can be configured
via the Rate menu (see
Figure 4-21 ).
To configure the control port data rate:
1. From the Control Port menu, select Rate (Main menu > Configuration >
System Configuration > Control Port > Rate).
The Rate menu appears (see Figure 4-21 ).
2. Select the terminal rate by typing the number corresponding the required
value, and press <Enter>.
3. Select Save to save the changes.
ASMi-52
Rate (9600 kbps)
1. 9600 kbps
2. 19200 kbps
3. 38400 kbps
4. 57600 kbps
5. 115200 kbps
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-21. Control Port Rate Menu