Tektronix AWG610 - Manual (Page 115)

Tutorials
AWG610 Arbitrary Waveform Generator User Manual
2-77
10. Push the Event Jump bottom button. The screen as shown in Figure 2–47
appears.
Figure 2-47: Screen for setting event jump
11. Push the Timing side button to set the timing to Sync.
12. Push the Data Entry bottom button.
This step must be made to go back to the sequence table screen.
13. Push the
b button once and then ' button twice to move the highlighted
cursor to the Logic Jump column.
14. Push the Jump to Next side button.
15. Push the
b button once to go to the next line.
16. Push the Jump to Specified Line side button.
17. Push the Jump to side button, and set 4 using the general purpose knob.
18. Push the CLEAR MENU bottom button.
This step must be made to make the
a and ' buttons able to move the
highlight cursor.
19. Push the
a button once to move the highlighted cursor to the Goto One
column.