Tektronix AWG610 - Manual (Page 219)

The Table Editor
AWG610 Arbitrary Waveform Generator User Manual
3-101
NOTE. Remember that you need to define the edit area (data points located
between the cursors) before executing the Operation commands.
To look at the waveform area outside the current display area, scroll the display
using the general purpose knob or the
y and b buttons. If the data to view is
more than 50 data points away from the current cursor location, it is faster to use
the numeric keypad to enter the new cursor value in the Cursor Position field.
Pushing the TOGGLE front-panel button switches the table contents to show
the data values at the other cursor. When toggling between the cursors, the Table
Editor displays the Upper cursor at the top of the table and the Lower cursor at
the bottom of the table.