Tektronix AWG610 - Manual (Page 255)

The APPL Window
AWG610 Arbitrary Waveform Generator User Manual
3-137
Figure 3-39: Execution of superposing
10. Select Superpose (bottom)
!Save... (side) to save the generated waveform
to a file.
Pattern data file (.PAT) or waveform file (.WFM) is used as input data. When a
pattern data file is specified for input, the application reads only the MSB bits
(DATA7). When a waveform file is specified, this process converts the values
equal to or greater than 0.5 to a logic 1, and the values less than 0.5 to a logic 0.
The pattern data or waveform data to be input must have the number of points
equal to or more than 20 points.
The pre-defined patterns shown in Table 3–38 are incorporated in the applica-
tion:
Input data