Tektronix AWG610 - Manual (Page 267)

AWG610 Arbitrary Waveform Generator User Manual
3-149
The UTILITY Window
This section describes the utility settings that can be made to the AWG610
Arbitrary Waveform Generator.
H Using external keyboards
H Setting general purpose knob direction
H Formatting floppy disk
H Displaying disk usage
H Displaying instrument status
H Setting the Internal clock (date and time)
H Adjusting CRT brightness
H Resetting the instrument
H Connecting to GPIB network
H Connecting to Ethernet
H Setting up hardcopies
H Running calibration and diagnostics
H Upgrading the system software
External Keyboards
You can connect either an ASCII 101-key keyboard or a JIS (Japanese) 106-key
keyboard to the keyboard connector on the rear panel. Do the following steps to
let the AWG610 Arbitrary Waveform Generator know the type of keyboard being
used:
1. Push the UTILITY (front-panel)
!System (bottom).
2. Select Keyboard Type using the
y and b buttons.
3. Select ASCII or JIS using the general purpose knob.
The changes take effect immediately.