Tektronix AWG610 - Manual (Page 253)

The APPL Window
AWG610 Arbitrary Waveform Generator User Manual
3-135
2. Select a standard network signal by pressing either bottom button, selecting
subordinate standard item from the pop–up menu, and press the OK side
button.
The side menu will change. See Figure 3–37.
3. Select a file or pre-defined pattern as a input data by pressing Read Ptn
from File... (side) or Pre-defined Pattern... (side).
Figure 3-37: Side menu will change after selecting a standard
When you select one of ITU–T E1, E2, E3, T1.102 DS1, DS1A, DS1C, DS2,
DS3, STS–T as a standard, you can use user defined isolated pulse.
4. Press Isolated Pulse... side button . The side menu will change.