Tektronix AWG610 - Manual (Page 183)

The Graphical Waveform Editor
AWG610 Arbitrary Waveform Generator User Manual
3-65
Table 3-13: Mathematical function commands (cont.)
Command Description Equation 1
Convolution... Creates a new waveform that is the convolution
value of the points in the source waveform. Refer
to page 3-67 for information on the Convolution
dialog box. Refer to page F-4 for the convolution
algorithm.
Correlation... Creates a new waveform that is the correlation
value of the points in the source waveform. Refer
to page 3-68 for information on the Correlation
dialog box. Refer to page F-5 for the correlation
algorithm.
Digital Filter... Creates a new waveform by applying a userĆdeĆ
fined digital filter to the source waveform data
values. Refer to page 3-69 for information on the
Digital Filter dialog box.
ReĆSampling... Changes the active editor window clock
frequency or data record length (number of
points). This command changes the data values
of the entire waveform record in the active editor
window. Refer to page 3-71 for information on
the ReĆsample dialog box.
XY View... Displays the XY view of two waveforms. The XY
view dialog box is an information display and
does not alter the waveform data. Waveform XY
view. Refer to page 3-71 for information on the
XY View dialog box.
1 F1, F2: Source waveforms
G: Waveformresulting fromoperation
(x): Waveformdata point value