Tektronix AWG610 - Manual (Page 53)

Operating Basics
AWG610 Arbitrary Waveform Generator User Manual
2-15
Table 2-3: Shortcut controls
Controls Description
VERTICAL
Displays the Vertical side menu. This is the same operation as
selecting SETUP (front)!Vertical (bottom).
Adjusts the vertical offset parameters. This is the same as selecting
SETUP (front)!Vertical (bottom)!Offset (side), and then turning the
general purpose knob.
Adjusts the amplitude parameters. This is the same as selecting
SETUP (front)!Vertical (bottom)!Amplitude (side), and then turning
the general purpose knob.
HORIZONTAL
Displays the Horizontal side menu. This is the same as selecting
SETUP (front)!Horizontal (bottom).
Adjusts the clock setting. This is the same as selecting SETUP
(front)!Horizontal (bottom)!Clock (side), and then turning the
general purpose knob.
TRIGGER
Displays the Trigger side menu. This is the same as selecting
SETUP (front)!Trigger (bottom).
Adjusts the trigger level setting. This is the same as selecting
SETUP (front)!Trigger (bottom)!Level (side), and then turning the
general purpose knob.
File Management
This section is an overview of the instrument commands and operations for
doing file management tasks. Refer to File Management on page 3–213 for more
information.
The AWG610 Arbitrary Waveform Generator uses numerous file formats to hold
different types of data. These file types are listed in Table 2–4. Note that the
instrument checks the file format and processes the file based on its content,
regardless of the file extension.
File Type Extensions