Acura 2013 TL - Manual (Page 112)

Adjust Alarm Volume
Select the warning alarm volume
from three levels.
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO (
/ ) button
repeatedly.
Press the SEL/RESET button to see
the selections.
Select the desired level by pressing
the INFO (
/ ) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ADJUST ALARM VOLUME’’ and
repeat the procedure again.
Multi-Information Display
108
12/07/20 10:43:35 31TK4640_113
2013 TL
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls