Acura 2013 TL - Manual (Page 547)

Unscrew and remove the engine oil
fill cap on top of the valve cover.
Pour in the oil slowly and carefully so
you do not spill. Clean up any spills
immediately. Spilled oil could
damage components in the engine
compartment. Install the engine oil
fill cap, and tighten it securely. Wait
a few minutes, and recheck the oil
level (see page
). Do not fill
above the upper mark; you could
damage the engine.
Oil is a major contributor to your
engine’s performance and longevity.
Always use a premium-grade
detergent oil displaying the API
Certification Seal. This seal indicates
the oil is energy conserving, and that
it meets the American Petroleum
Institute’s latest requirements. It is
highly recommended that you use
Acura Motor Oil in your vehicle for
optimum engine protection.
Make sure the API Certification Seal
says ‘‘For Gasoline Engines.’’
The oil viscosity or weight is
provided on the container’s label.
Acura Motor Oil is the preferred
0W-20 lubricant for your vehicle.
0W-20 oil is formulated for year-
round protection of your vehicle to
improve cold weather starting and
fuel economy.
474
CONTINUED
Recommended Engine Oil
2WD models:
Adding Engine Oil
Ma
int
e
na
nce
543
ENGINE OIL FILL CAP
Ambient Temperature API CERTIFICATION SEAL
12/07/20 11:40:00 31TK4640_548
2013 TL