Protecting your discs – Acura 2013 TL User Manual

Page 386

Advertising
background image

When a disc is not being played,
store it in its case to protect it from
dust and other contamination. To
prevent warpage, keep discs out of
direct sunlight and extreme heat.

To clean a disc, use a clean soft cloth.
Wipe across the disc from the center
to the outside edge.

A new disc may be rough on the
inner and outer edges. The small
plastic pieces causing this roughness
can flake off and fall on the
recording surface of the disc,
causing skipping or other problems.
Remove these pieces by rubbing the
inner and outer edges with the side
of a pencil or pen.

Never try to insert foreign objects in
the disc changer.

Handle a disc by its edges; never
touch either surface. Do not place
stabilizer rings or labels on the disc.
These, along with contamination
from finger prints, liquids, and felt-
tip pens, can cause the disc to not
play properly, or possibly jam in

The in-dash disc player has a
sophisticated and delicate
mechanism. If you insert a damaged
disc as indicated in this section, it
may become stuck inside and
damage the audio unit.

Examples of these discs are shown
as follows.

Protecting Discs

Additional Inf ormation on
Recommended Discs

Protecting Your Discs

382

12/07/20 11:18:58 31TK4640_387

2013 TL

Fe
a

tu

re

s

the drive.

Advertising
This manual is related to the following products: