Acura 2013 TL - Manual (Page 293)

When the system finds a strong
signal, it will stop and play that
station for about 10 seconds. If you
do nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the SCAN side of the bar again. Press the preset button, and hold
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
1.
2.
3.
4.
CONTINUED
To store a preset memory location:
Playing the AM/FM Radio (Models with navigation system)
AUTO SELECT
Preset
Fe
a
tu
re
s
289
A.SEL INDICATOR
A.SEL
12/07/20 11:06:37 31TK4640_294
2013 TL