Acura 2013 TL - Manual (Page 205)

The trunk and glove box cannot be
opened when you turn the trunk
main switch off and lock the glove
box and trunk pass-through cover
with the built-in key. Then, the trunk
cannot be opened by using the
remote or the exterior trunk release
switch.
Remove the built-in key from the
remote by pressing the button, then
give that remote to someone else as
a valet key.
To avoid damaging the remote and
the built-in key, never pull on the
built-in key unless you are pressing
the release button.
The keyless access system uses an
electric field to identify the remote.
If you use medical equipment such
as a cardiac pacemaker, ask your
doctor if the electric field used by
the remote will affect it.
The built-in key can be used to lock/
unlock the doors and the trunk when
the remote battery becomes weak
and the power door lock/unlock
operation is disabled.
To remove the built-in key, pull it out
while pressing the release button. To
reinstall the built-in key, push the
key into the remote until it clicks.
Valet Function Built-in key and Remote
Keyless Access System
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
201
RELEASE BUTTON
BUILT-IN KEY
12/07/20 10:55:35 31TK4640_206
2013 TL