Acura 2013 TL - Manual (Page 172)

Both outside door mirrors have a
reverse tilt feature. When in
reverse, the selected mirror will
tilt down slightly to improve your
view as you parallel park. Shifting
out of reverse will return the
mirror to its original position.
To tilt the driver’s mirror, place
the selector switch in the left
position.
To tilt the passenger’s mirror,
place the switch in the right
position.
To turn the feature off, place the
switch in the center position.
When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep
Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
With the ignition switch in the
ON (II) position, move the
selector switch to the L (driver’s
side), or R (passenger’s side).
Outside mirror positions can be
stored in the driving position
memory system (see page
).
3.
1.
2.
170
Adjusting the Power Mirrors Reverse Tilt Door Mirror
Mirrors
168
ADJUSTMENT SWITCH
SELECTOR SWITCH
12/07/20 10:50:56 31TK4640_173
2013 TL
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
your settings.
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). For more information, see
pages
and .
:
184 187