Acura 2013 TL - Manual (Page 539)

CONTINUED
Press the SEL/RESET button on the
steering wheel repeatedly to select
the engine oil life. The message
‘‘SERVICE,’’ along with ‘‘0%,’’ and the
maintenance item code are displayed
on the multi-information display
when the calculated engine oil life is
0 to 1 percent.
These messages will come on every
time you turn the ignition switch to
the ON (II) position.
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s).
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
Immediately have the service
performed, and make sure to reset
the display as described on page
. 537
Maintenance Minder
Ma
int
e
na
nce
535
U.S.
TOTAL PAST DUE DISTANCE
TRAVELED
MAINTENANCE CODES
Canada
TM
12/07/20 11:39:05 31TK4640_540
2013 TL
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). For more information, see
pages
and .
:
184 187