Acura 2013 TL - Manual (Page 248)

The SVC mode controls the volume
based on vehicle speed. The faster
you go, the louder the audio volume
becomes. As you slow down, the
audio volume decreases.
The SVC has four modes: SVC OFF,
SVC LOW, SVC MID, and SVC
HIGH. Turn the selector knob to
adjust the setting to your liking. If
you feel the sound is too loud,
choose low. If you feel the sound is
too quiet, choose high.
Adjusts the volume level
based on the vehicle speed.
Each mode is shown in the display as
it changes. Turn the selector knob to
adjust the setting to your liking.
When the level reaches the center,
you will see ‘‘C’’ in the display.
Adjusts the strength of
sound from the center speaker.
Adjusts the strength of
sound from the subwoofer speaker.
If the fader adjustment is set to F9
(maximum front level), the
subwoofer is turned off.
Dolby
PL (ProLogic) II signal processing
creates multi-channel surround
sound from 2 channel stereo audio
sources. Dolby ProLogic II can only
be activated when listening to DISC
(CD-DA, MP3/WMA), XM Radio,
and AUX. When ProLogic II is active,
‘‘PL II’’ is shown in the audio display.
Manufactured under license from
Dolby Laboratories. Dolby, Pro
Logic, MLP Lossless and the double-
D symbol are trademarks of Dolby
Laboratories.
To return to normal play, push the
RETURN or SETUP button.
Except SVC adjustment
Playing the AM/FM Radio (Models without navigation system)
Speed-sensitive Volume
Compensation (SVC) SVC CENTER
SUBW
Dolby PL (ProLogic) II
244
12/07/20 11:01:00 31TK4640_249
2013 TL
Fe
a
tu
re
s