Acura 2013 TL User Manual
Page 369
This audio system can select and
play the audio files on a USB flash
memory device with the same
controls used for the disc player. To
play a USB flash memory device,
connect it to the USB adapter cable
in the console compartment, then
press the HDD/AUX button until
you see ‘‘USB’’ in the display. The
power mode must be ACCESSORY
or ON.
Your vehicle has the engine start/
stop button instead of an ignition
switch. For more information on how
to select the power mode, see
page
.
Do not use a device such as a card
reader or hard drive as it or your
files may be damaged.
Do not connect your USB flash
memory device using a hub.
Do not use an extension cable to
the USB adapter cable equipped
with your vehicle.
Do not keep a USB flash memory
device in the vehicle. Direct
sunlight and high heat will damage
it.
We recommend backing up your
data before playing a USB flash
memory device.
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
AAC formats.
Depending on the type and
number of files, it may take some
time before they begin to play.
Only AAC format files recorded with
iTunes are playable on this audio unit.
The recommended USB flash
memory devices are 256 MB or
higher, and formatted with the FAT
file system. Some digital audio
players may be compatible as well.
Some USB flash memory devices
(such as devices with security lock-
out features, etc.) will not work in
this audio unit.
:
CONTINUED
To Play a USB
Flash Memory Device
Playing a USB Flash Memory Device (Models with navigation system)
Fe
a
tu
re
s
365
NOTE:
12/07/20 11:16:50 31TK4640_370
2013 TL