Acura 2013 TL - Manual (Page 591)

Store the center cap in the trunk.
Make sure it does not get
scratched or damaged.
Store the jack and tools in the tool
kit case. Place the tool kit case in
the flat tire.
To remove the spacer cone,
squeeze the tabs on the wing
bolt to disengage it from the
center of the spacer cone,
then pull the bolt downward.
To install the wing bolt to the
spacer cone, reverse this procedure.
Secure the flat tire by screwing
the wing bolt back into its hole.
Place the flat tire face down in the
spare tire well.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
Lower the trunk floor, then close
the trunk lid.
Your vehicle’s original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
(see
page ).
17.
18.
19.
20.
21.
22.
518
Changing a Flat Tire
Changing a Tire with TPMS
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
587
SPACER CONE
TAB
SPACER CONE
For compact
spare tire
For normal
tire
WING BOLT
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
12/07/20 11:45:47 31TK4640_592
2013 TL