Acura 2013 TL - Manual (Page 55)

To deactivate the lockable retractor
and remove a child seat, unlatch the
buckle, unroute the seat belt, and let
the belt fully retract.
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
After properly securing the child
seat with the lap/shoulder belt
(see page
), pivot the head
restraint down (see page ) and
route the tether strap over the
head restraint.
1.
49
163
CONTINUED
Installing a Child
Seat with a Tether
Installing a Child Seat
Using an Outer Anchor
Dr
iv
er
and
P
asseng
er
Saf
e
ty
51
TETHER ANCHORAGE POINTS
TETHER STRAP HOOK
ANCHOR
COVER
COVER ANCHOR
12/07/20 10:36:19 31TK4640_056
2013 TL