Acura 2013 TL - Manual (Page 565)

Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver.
Pull down the under cover from
the bumper carefully.
Use a flat-tip screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back. 4.
5.
3. 2.
CONTINUED
Lights
Ma
int
e
na
nce
561
HOLDING CLIP
UNDER COVER
COVER BOLT
HOLDING CLIP
BOLT
CONNECTOR
BULB
12/07/20 11:42:24 31TK4640_566
2013 TL