Changing a flat tire – Acura 2013 TL User Manual
Page 588
Advertising
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Take the tool case out of the spare
tire.
Unscrew the wing bolt and take
the spare tire out of its well.
Take the jack out of the tool kit
case.
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Place blocks in front and back of
the wheel diagonally opposite the
tire you are changing.
7.
8.
6.
4.
5.
9.
Changing a Flat Tire
584
WHEEL NUT WRENCH
EXTENSION
JACK
WHEEL NUT
WRENCH
JACKING POINTS
12/07/20 11:45:23 31TK4640_589
2013 TL
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
Advertising
This manual is related to the following products: