Acura 2013 TL - Manual (Page 138)

To set the default settings, press the
INFO (
/ ) button to select SET
then press the SEL/RESET button.
If you want to cancel DEFAULT
ALL, select CANCEL, then press the
SEL/RESET button. The screen
goes back to the previous display.
If you want to set the default settings,
press the INFO (
/ ) button to
select DEFAULT ALL, then press
the SEL/RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘SECURITY RELOCK TIMER’’ and
repeat the procedure again.
DEFAULT ALL
Multi-Information Display
134
12/07/20 10:46:33 31TK4640_139
2013 TL
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls