Keyless access system – Acura 2013 TL User Manual

Page 193

Advertising
background image

After entering the vehicle, insert the
keyless access remote into the slot
to start the engine (see page

).

If the keyless access remote battery
dies, you may have to use the
built-in key to unlock/lock the
vehicle. The built-in key is stored
inside the keyless access remote
(see page

).

If the steering wheel is locked, the
engine cannot start. The multi-
information display shows you the
above message and the indicator in
the engine start/stop button blinks.
To unlock the steering wheel, apply
force by turning it left and right
while pressing the engine start/stop
button at the same time.

the multi-

information display shows the
‘‘INSERT KEYLESS REMOTE
INTO SLOT’’ message, then the ‘‘TO
START ENGINE:’’ message will be
shown after you insert the remote
into the slot. Each time you press the
engine start/stop button, the
‘‘INSERT KEYLESS REMOTE
INTO SLOT’’ message is shown on
the multi-information display if the
remote is not in the slot.

201

197

When the keyless access system main
switch in the glove box is off,

To unlock the steering wheel

Keyless Access System

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

189

NOTE:

TO UNLOCK WHEEL

12/07/20 10:54:02 31TK4640_194

2013 TL

Advertising
This manual is related to the following products: