Acura 2013 TL - Manual (Page 194)

To turn the vehicle off, make sure
the vehicle is completely stopped and
do the following.
If the shift lever is in any gear
other than neutral, depress the
clutch pedal, then press the engine
start/stop button.
The engine stops and the power
mode switches from ON to
VEHICLE OFF (LOCK).
Before leaving the vehicle, make
sure it is off. You can verify if the
power is off by checking the engine
start/stop button LED indicator.
You can only place the vehicle in the
VEHICLE OFF (LOCK) mode if the
transmission is in Park. You will see
the ‘‘SHIFT TO PARK’’ message on
the multi-information display if you
press the engine start/stop button to
turn the vehicle off with the shift
lever in any other position except
for P (Park).
If the shift lever is in neutral, press
the engine start/stop button.
Press the engine start/stop button
with your foot on the brake pedal.
Shift to park (P).
Make sure to press the brake pedal
or set the parking brake before
turning off the engine. If your foot
is OFF the clutch pedal in any gear
position, pressing the engine start/
stop button turns off the engine,
and the vehicle may move
forward or backward.
1.
2.
Manual Transmission
Automatic Transmission
On automatic transmission models On manual transmission models
Stopping the Engine
Keyless Access System
Operation Guidance
190
SHIFT TO PARK
A/T model only A/T model
12/07/20 10:54:13 31TK4640_195
2013 TL
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls