Lights – Acura 2013 TL User Manual
Page 561
Advertising
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver.
Use a flat-tip screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back.
Pull down the under cover from
the bumper carefully.
3.
2.
1.
4.
CONTINUED
Replacing the Front
Side Marker Light Bulb
Lights
Ma
int
e
na
nce
557
HOLDING CLIP
UNDER COVER
BOLT
HOLDING CLIP
BOLT
12/07/20 11:41:54 31TK4640_562
2013 TL
Advertising
This manual is related to the following products: