Acura 2013 TL - Manual (Page 605)

If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
, and , or the diagram on
the fuse box lid or the fuse label,
which fuse or fuses control that
component. Check those fuses first,
but check all the fuses before
deciding that a blown fuse is not the
cause. Replace any blown fuses and
check if the device works.
Remove the cover from the
Check each of the large fuses in
the under-hood fuse box by
looking at the wire inside.
Removing these fuses requires a
Phillips-head screwdriver.
Turn the ignition switch to the
LOCK (0) position.
Make sure the headlights and all
other accessories are off.
3.
1.
2.
604 605 606
CONTINUED
Checking and Replacing Fuses
Fuses
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
601
FUSE
BLOWN
12/07/20 11:47:32 31TK4640_606
2013 TL
Models equipped with the
keyless access system have an engine
start/stop button instead of
an ignition switch. VEHICLE OFF
(LOCK) Mode is the equivalent of
LOCK (0). For more information,
see pages and .
:
184 187
fuse box.