QTECH QSW-2800 Инструкция по настройке User Manual
Page 112
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
98
Firmware Revision:4.0.1
Software Revision:6.2.30.0
Serial Number:
Manufacturer Name:****
Model Name:Unknown
Assert ID:Unknown
IEEE 802.3 Information :
auto-negotiation support: Supported
auto-negotiation support: Not Enabled
PMD auto-negotiation advertised capability: 1
operational MAU type: 1
SwitchA# show lldp neighbors interface ethernet 1/2
Port name: interface ethernet 1/2
Port Remote Counter: 1
Neighbor Index: 1
Port name: Ethernet1/2
Port Remote Counter : 1
TimeMark :20
ChassisIdSubtype :4
ChassisId :00-1f-ce-00-00-02
PortIdSubtype :Local
PortId:1
PortDesc : Ethernet1/1
SysName :****
SysDesc :*****
SysCapSupported :4
SysCapEnabled :4
Explanation:
1) Both Ethernet1/2 of switch A and Ethernet1/1 of switch B are the ports of network
connection device, they will not send LLDP packets with MED TLV information forwardly.
Although configure Ethernet1/1 of switch B to send MED TLV information, it will not send the
related MED information, that results the corresponding Remote table without the related MDE
information on Ethernet1/2 of switch A.
2) LLDP-MED device is able to send LLDP packets with MED TLV forwardly, so the
corresponding Remote table with LLDP MED information on Ethernet1/1 of switch A.