QTECH QSW-2800 Инструкция по настройке User Manual

Page 331

Advertising
background image

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1

317

Global Mode

radius-server authentication host {

<IPaddress> | <IPv6address> } [[port

{<portNum>}] [key <string>] [primary]

[access-mode {dot1x|telnet}]

no radius-server authentication host

<IPaddress>

Specifies the IP address and listening port

number, cipher key, whether be primary

server or not and access mode for the

RADIUS server; the no command deletes the

RADIUS authentication server.

radius-server accounting host {<ipv4-

address> | <ipv6-address>} [port <port-

number>] [key <string>] [primary]

no radius-server accounting host {<ipv4-

address> | <ipv6-address>}

Specifies the IPv4/IPv6 address and the port

number, whether be primary server for

RADIUS accounting server; the no command

deletes the RADIUS accounting server.

4. Configure the parameter of the RADIUS service

Command

Explanation

Global Mode

radius-server dead-time <minutes>

no radius-server dead-time

To configure the interval that the RADIUS

becomes available after it is down. The no

form of this command will restore the default

configuration.

radius-server retransmit <retries>

no radius-server retransmit

To configure retry times for the RADIUS

packets. The no form of this command

restores the default configuration.

radius-server timeout <seconds>

no radius-server timeout

To configure the timeout value for the

RADIUS server. The no form of this command

will restore the default configuration.

radius-server accounting-interim-update

timeout <seconds>

no radius-server accounting-interim-

update timeout

To

configure

the

update

interval

for

accounting. The no form of this command will

restore the default configuration.

5. Configure the IP address of the RADIUS NAS

Command

Explanation

Global Mode

radius nas-ipv4 <ip-address>

no radius nas-ipv4

To configure the source IP address for the

RADIUS packets for the switch.

radius nas-ipv6 <ipv6-address>

no radius nas-ipv6

To configure the source IPv6 address for the

RADIUS packets for the switch.

Advertising