QTECH QSW-2800 Инструкция по настройке - Manual (Page 288)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
274
Thursday | Friday | Saturday | Sunday} <start_time> to
{Monday | Tuesday | Wednesday | Thursday | Friday |
Saturday | Sunday} <end_time>
request of the week, and every
week will run by the time range.
periodic {{Monday+Tuesday+Wednesday+Thursday+
Friday+Saturday+Sunday} | daily | weekdays | weekend}
<start_time> to <end_time>
[no] absolute-periodic {Monday | Tuesday | Wednesday
| Thursday | Friday | Saturday | Sunday} <start_time> to
{Monday | Tuesday | Wednesday | Thursday | Friday |
Saturday | Sunday} <end_time>
Stop the function of the time
range in the week. [no] periodic
{{Monday+Tuesday+Wednesday+Thursday+
Friday+Saturday+Sunday} | daily | weekdays | weekend}
<start_time> to <end_time>
(3) Configure absolute time range
Command Explanation
Global Mode
absolute start <start_time> <start_data> [end
<end_time> <end_data>]
Configure absolute time range.
[no] absolute start <start_time> <start_data> [end
<end_time> <end_data>]
Stop the function of the time
range.
4. Bind access-list to a specific direction of the specified port.
Command Explanation
Physical Port Mode/VLAN Interface Mode
{ip|ipv6|mac|mac-ip} access-group <acl-
name> {in} [traffic-statistic]
no {ip|ipv6|mac|mac-ip} access-group <acl-
name> {in}
Physical interface mode: Applies an
access-list to the specified direction on the
port; the no command deletes the access-
list bound to the port.
VLAN interface mode: Applies an access-
list to the specified direction on the port of
VLAN; the no command deletes the
access-list bound to the port of VLAN.
5. Clear the filtering information of the specified port
Command Explanation