Ntermediate, Gent, Roubleshooting – QTECH QSW-2800 Инструкция по настройке User Manual

Page 354: 4 pppoe intermediate agent troubleshooting

Advertising
background image

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1

340

Typical configuration (2) in the following:

Step1: Switch enables global PPPoE IA function, MAC as 0a0b0c0d0e0f.

Switch(config)#pppoe intermediate-agent

Step2: Configure port ethernet1/1 which connect server as trust port, and configure vendor tag

strip function.

Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust

Switch(config-if-ethernet1/1)#pppoe intermediate-agent vendor-tag strip

Step3: Port ethernet1/2 of vlan1 and port ethernet1/3 of vlan 1234 enable PPPoE IA function of

port.

Switch(config-if-ethernet1/2)#pppoe intermediate-agent

Switch(config-if-ethernet1/3)#pppoe intermediate-agent

Step4: Configure pppoe intermediate-agent access-node-id as abcd.

Switch(config)#pppoe intermediate-agent type tr-101 circuit-id access-node-id abcd

Step5: Configure pppoe intermediate-agent identifier-

string as “efgh”, combo mode as spv,

delimiter of Slot ID and Port ID as “#”, delimiter of Port ID and Vlan ID as “/”.

Switch(config)#pppoe intermediate-agent type tr-101 circuit-id identifier-string efgh option spv

delimiter # delimiter /

Step6: Configure circuit-id value as bbbb on port ethernet1/2.

Switch(config-if-ethernet1/2)#pppoe intermediate-agent circuit-id bbbb

Step7: Configure remote-id as xyz on ethernet1/3.

Switch(config-if-ethernet1/3)#pppoe intermediate-agent remote-id xyz

circuit-

id value is ”bbbb”, remote-id value is ”0a0b0c0d0e0f” for the added vendor tag of port

ethernet1/2.

circuit-

id value is ”efgh eth 01#003/1234”, remote-id value is ”xyz” for the added vendor tag of

port ethernet1/3.

47.4 PPPoE Intermediate Agent

Troubleshooting

Only switch enables global PPPoE intermediate agent firstly, this function can be run on port.

Configure a trust port at least, and this port can connect to server.

vendor tag strip function must be configured by trust port.

Circuit-id override priority is: pppoe intermediate-agent circuit-id < pppoe intermediate-agent

identifier-string option delimiter < pppoe intermediate-agent access-node-id.

Advertising