QTECH QSW-2800 Инструкция по настройке - Manual (Page 79)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
65
[sysCap]
no lldp transmit optional tlv
10. Configure the size of space to store Remote Table of the port
Command Explanation
Port Configuration Mode
lldp neighbors max-num < value >
no lldp neighbors max-num
Configure the size of space to store Remote Table of
the port as the specified value or default value.
11. Configure the type of operation when the Remote Table of the port is full
Command Explanation
Port Configuration Mode
lldp tooManyNeighbors {discard |
delete}
Configure the type of operation when the Remote
Table of the port is full.
12. Display and debug the relative information of LLDP
Command Explanation
Admin, Global Mode
show lldp Display the current LLDP configuration information.
show lldp interface ethernet
<IFNAME>
Display the LLDP configuration information of the
current port.
show lldp traffic Display the information of all kinds of counters.
show lldp neighbors interface
ethernet < IFNAME >
Display the information of LLDP neighbors of the
current port.
show debugging lldp Display all ports with LLDP debug enabled.
Admin Mode
debug lldp
no debug lldp
Enable or disable the DEBUG switch.
debug lldp packets interface
ethernet <IFNAME>
no debug lldp packets interface
ethernet <IFNAME>
Enable or disable the DEBUG packet-receiving and
sending function in port or global mode.
Port configuration mode
clear lldp remote-table Clear Remote-table of the port.