QTECH QSW-2800 Инструкция по настройке - Manual (Page 78)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
64
lldp mode
(send|receive|both|disable)
Configure the operating state of port LLDP.
4. Configure the intervals of LLDP updating messages
Command Explanation
Global Mode
lldp tx-interval <integer>
no lldp tx-interval
Configure the intervals of LLDP updating messages
as the specified value or default value.
5. Configure the aging time multiplier of LLDP messages
Command Explanation
Global Mode
lldp msgTxHold <value>
no lldp msgTxHold
Configure the aging time multiplier of LLDP
messages as the specified value or default value.
6. Configure the sending delay of updating messages
Command Explanation
Global Mode
lldp transmit delay <seconds>
no lldp transmit delay
Configure the sending delay of updating messages
as the specified value or default value.
7. Configure the intervals of sending Trap messages
Command Explanation
Global Mode
lldp notification interval
<seconds>
no lldp notification interval
Configure the intervals of sending Trap messages
as the specified value or default value.
8. Configure to enable the Trap function of the port
Command Explanation
Port Configuration Mode
lldp trap <enable|disable> Enable or disable the Trap function of the port.
9. Configure the optional information-sending attribute of the port
Command Explanation
Port Configuration Mode
lldp transmit optional tlv
[portDesc] [sysName] [sysDesc]
Configure the optional information-sending attribute
of the port as the option value of default values.