QTECH QSW-2800 Инструкция по настройке - Manual (Page 48)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
34
ftp-dir <ftpServerUrl>
For FTP client, server file list can be checked.
FtpServerUrl format looks like: ftp: //user:
password@IPv4|IPv6 Address.
2. FTP server configuration
(1) Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server, the no command shuts down FTP
server and prevents FTP user from logging in.
(2) Configure FTP login username and password
Command Explanation
Global Mode
ip ftp username <username>
password [0 | 7] <password>
no ip ftp username<username>
Configure FTP login username and password; this no
command will delete the username and password.
(3) Modify FTP server connection idle time
Command Explanation
Global Mode
ftp-server timeout <seconds> Set connection idle time.
3. TFTP server configuration
(1) Start TFTP server
Command Explanation
Global Mode
tftp-server enable
no tftp-server enable
Start TFTP server, the no command shuts down TFTP
server and prevents TFTP user from logging in.
(2) Modify TFTP server connection idle time
Command Explanation
Global Mode
tftp-server retransmission-
timeout <seconds>
Set maximum retransmission time within timeout
interval.
(3) Modify TFTP server connection retransmission time
Command Explanation
Global Mode
tftp-server retransmission-
number <number>
Set the retransmission time for TFTP server.