QTECH QSW-2800 Инструкция по настройке - Manual (Page 92)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
78
Customer Service Provider Customer
CE PE
802.1ah OAMPDU
802.3ah
Ethernet in
the First Mile
Typical OAM application topology
11.2 EFM OAM Configuration
EFM OAM configuration task list
1. Enable EFM OAM function of port
2. Configure link monitor
3. Configure remote failure
Note: it needs to enable OAM first when configuring OAM parameters.
1. Enable EFM OAM function of port
Command Explanation
Port mode
ethernet-oam mode {active | passive}
Configure work mode of EFM OAM, default is
active mode.
ethernet-oam
no ethernet-oam
Enable EFM OAM of port, no command disables
EFM OAM of port.
ethernet-oam period <seconds>
no ethernet-oam period
Configure transmission period of OAMPDU
(optional), no command restores the default
value.
ethernet-oam timeout <seconds>
no ethernet-oam timeout
Configure timeout of EFM OAM connection, no
command restores the default value.