QTECH QSW-2800 Инструкция по настройке - Manual (Page 373)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
359
enable
no enable
Enable MRPP ring, format “no” disables
enabled MRPP ring.
Port mode
mrpp ring <ring-id> primary-port
no mrpp ring <ring-id> primary-port
Specify primary port of MRPP ring.
mrpp ring <ring-id> secondary-port
no mrpp ring <ring-id> secondary-port
Specify secondary port of MRPP ring.
3) Configure the query time of MRPP
Command Explanation
Global Mode
mrpp poll-time <20-2000> Configure the query interval of MRPP.
4) Configure the compatible mode
Command Explanation
Global Mode
mrpp errp compatible
no mrpp errp compatible
Enable the compatible mode for ERRP, the no
command disables the compatible mode.
mrpp eaps compatible
no mrpp eaps compatible
Enable the compatible mode for EAPS, the no
command disables the compatible mode.
errp domain <domain-id>
no errp domain <domain-id>
Create ERRP domain, the no command
deletes the configured ERRP domain.
5) Display and debug MRPP relevant information
Command Explanation
Admin Mode
debug mrpp
no debug mrpp
Disable MRPP module debug information,
format “no” disable MRPP debug information
output.
show mrpp {<ring-id>} Display MRPP ring configuration information.
show mrpp statistics {<ring-id>}
Display receiving data packet statistic
information of MRPP ring.
clear mrpp statistics {<ring-id>}
Clear receiving data packet statistic
information of MRPP ring.