Witch, Pgrade, 1 switch system files -28 – QTECH QSW-2800 Инструкция по настройке User Manual

Page 42: 2 bootrom upgrade -28, 5 switch upgrade, 1 switch system files, 2 bootrom upgrade

Advertising
background image

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1

28

not be able to communicate with NMS properly.

If Trap function is required, rememb

er to enable Trap (use “snmp-server enable traps”

command). And remember to properly configure the target host IP address and community
string for Trap (use “snmp-server host” command) to ensure Trap message can be sent to the

specified host.

If RMON func

tion is required, RMON must be enabled first (use “rmon enable” command).

Use “show snmp” command to verify sent and received SNMP messages; Use “show snmp
status” command to verify SNMP configuration information; Use “debug snmp packet” to

enable SNMP debugging function and verify debug information.
If users still can’t solve the SNMP problems, Please contact our technical and service center.

2.5 Switch Upgrade

Switch provides two ways for switch upgrade: BootROM upgrade and the TFTP/FTP upgrade

under Shell.

2.5.1 Switch System Files

The system files includes system image file and boot file. The updating of the switch is to

update the two files by overwrite the old files with the new ones.

The system image files refers to the compressed files of the switch hardware drivers, and

software support program, etc, namely what we usually call the IMG update file. The IMG file

can only be saved in the FLASH with a defined name of nos.img

The boot file is for initiating the switch, namely what we usually call the ROM update file (It can

be compressed into IMG file if it is of large size). The boot file can only be saved in the ROM in

which the file name is defined as boot.rom

The update method of the system image file and the boot file is the same. The switch supplies

the user with two modes of updating: 1. BootROM mode; 2. TFTP and FTP update at Shell

mode. This two update method will be explained in details in following two sections.

2.5.2 BootROM Upgrade

There are two methods for BootROM upgrade: TFTP and FTP, which can be selected at

BootROM command settings.

Advertising