QTECH QSW-2800 Инструкция по настройке - Manual (Page 72)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
58
default.
8. Reset the port shut down by ULDP
Command Explanation
Global configuration mode or port configuration mode
uldp reset
Reset all ports in global configuration mode;
Reset the specified port in port configuration mode.
9. Display and debug the relative information of ULDP
Command Explanation
Admin mode
show uldp [interface ethernet IFNAME]
Display ULDP information. No parameter means
to display global ULDP information. The
parameter specifying a port will display global
information and the neighbor information of the
port.
debug uldp fsm interface ethernet
<IFname>
no debug uldp fsm interface ethernet
<IFname>
Enable or disable the debug switch of the state
machine transition information on the specified
port.
debug uldp error
no debug uldp error
Enable or disable the debug switch of error
information.
debug uldp event
no debug uldp event
Enable or disable the debug switch of event
information.
debug uldp packet {receive|send}
no debug uldp packet {receive|send}
Enable or disable the type of messages can be
received and sent on all ports.
debug uldp {hello|probe|echo|
unidir|all} [receive|send] interface
ethernet <IFname>
no debug uldp {hello|probe|echo|
unidir|all} [receive|send] interface
ethernet <IFname>
Enable or disable the content detail of a
particular type of messages can be received and
sent on the specified port.