QTECH QSW-2800 Инструкция по настройке - Manual (Page 55)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
41
Configure private IP address pool for member switches of the cluster
Create or delete cluster
Add or remove a member switch
Configure attributes of the cluster in the commander switch
Enable or disable automatically adding cluster members
Set automatically added members to manually added ones
Set or modify the time interval of keep-alive messages on switches in the cluster.
Set or modify the max number of lost keep-alive messages that can be tolerated
Clear the list of candidate switches maintained by the switch
Configure attributes of the cluster in the candidate switch
Set the time interval of keep-alive messages of the cluster
Set the max number of lost keep-alive messages that can be tolerated in the cluster
Remote cluster network management
Remote configuration management
Remotely upgrade member switch
Reboot member switch
Manage cluster network with web
Enable http
Manage cluster network with snmp
Enable snmp server
1. Enable or disable cluster
2. Create a cluster
Command Explanation
Global Mode
cluster run [key <WORD>] [vid <VID>]
no cluster run
Enable or disable cluster function in the switch.
Command Explanation
Global Mode
cluster ip-pool <commander-ip>
no cluster ip-pool
Configure the private IP address pool for
cluster member devices.
cluster commander [<cluster_name>]
no cluster commander
Create or delete a cluster.
cluster member {nodes-sn <nodes-sn> |
mac-address <mac-addr> [id <member-
id> ] | auto-to-user}
no cluster member {id <member-id> |
Add or remove a member switch.