QTECH QSW-2800 Инструкция по настройке - Manual (Page 37)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
23
network management. NMS obtains the network management information by visiting the MIB
of SNMP Agent.
The switch can operate as a SNMP Agent, and supports both SNMP v1/v2c and SNMP v3.
The switch supports basic MIB-II, RMON public MIB and other public MID such as BRIDGE
MIB. Besides, the switch supports self-defined private MIB.
2.4.3 Introduction to RMON
RMON is the most important expansion of the standard SNMP. RMON is a set of MIB
definitions, used to define standard network monitor functions and interfaces, enabling the
communication between SNMP management terminals and remote monitors. RMON provides
a highly efficient method to monitor actions inside the subnets.
MID of RMON consists of 10 groups. The switch supports the most frequently used group 1, 2,
3 and 9:
Statistics: Maintain basic usage and error statistics for each subnet monitored by the Agent.
History: Record periodical statistic samples available from Statistics.
Alarm: Allow management console users to set any count or integer for sample intervals and
alert thresholds for RMON Agent records.
Event: A list of all events generated by RMON Agent.
Alarm depends on the implementation of Event. Statistics and History display some current or
history subnet statistics. Alarm and Event provide a method to monitor any integer data
change in the network, and provide some alerts upon abnormal events (sending Trap or record
in logs).
2.4.4 SNMP Configuration
2.4.4.1 SNMP Configuration Task List
Enable or disable SNMP Agent server function
Configure SNMP community string
Configure IP address of SNMP management base
Configure engine ID
Configure user
Configure group
Configure view
Configuring TRAP
Enable/Disable RMON
1. Enable or disable SNMP Agent server function
Command Explanation