QTECH QSW-2800 Инструкция по настройке - Manual (Page 148)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
134
learning function for the port will be disabled: the “no
switchport port-security
” command disables the
MAC address binding function for the port, and
restores the MAC address learning function for the
port.
2. Lock the MAC addresses for a port
Command Explanation
Port Mode
switchport port-security lock
no switchport port-security lock
Lock the port, then MAC addresses learned will be
disabled. The
“no switchport port-security lock”
command restores the function.
switchport port-security convert
Convert dynamic secure MAC addresses learned by
the port to static secure MAC addresses.
switchport port-security timeout
<value>
no switchport port-security
timeout
Enable port locking timer function; the “no switchport
port-security timeout ” restores the default setting.
switchport port-security mac-
address <mac-address>
no switchport port-security mac-
address <mac-address>
Add static secure MAC
address; the “no switchport
port-security mac-address
” command deletes static
secure MAC address.
Admin Mode
clear port-security dynamic
[address <mac-addr> | interface
<interface-id>]
Clear dynamic MAC addresses learned by the
specified port.
3. MAC address binding property configuration
Command Explanation
Port Mode
switchport port-security
maximum <value>
no switchport port-security
maximum <value>
Set the maximum number of secure MAC addresses
for a port; the “no switchport port-security
maximum
” command restores the default value.
switchport port-security violation
{protect | shutdown} [recovery
<30-3600>]
no switchport port-security
violation
Set the violation mode for the port; the “no
switchport port-security violation
” command
restores the default setting.