Elmo Rietschle 2FC4...-1CB - Manual (Page 30)

5 Installation
610.00260.40.000 · 05.2014 30 / 74 © Gardner Denver Deutschland GmbH
Mount the drive controller
14. Place the drive controller (1) on the adapter plate (2) such that the collar of the
adapter dips into the opening at the bottom of the cooling element.
15. Secure the drive controller to the adapter plate using the screws (3) (torque:
4.0 Nm [2.95 ft lbs]).
Power connection
The power connections are made as described in the sections Power connection
of sizes A - C [➙ 22] and Power connection of size D [➙ 23].
Braking chopper
The braking connections are made as described in the section Connections for
braking resistor [➙ 24].
Control terminals
The control terminals are provided as described in the section Control terminals
[➙ 24].
5.4.3
5.4.4
5.4.5