Elmo Rietschle 2FC4...-1CB - Manual (Page 6)

2 Further information
610.00260.40.000 · 05.2014 6 / 74 © Gardner Denver Deutschland GmbH
Term Explanation
Plant Part provided by the user in which the vacuum pump/compressor is installed.
Vacuum
pump/compressor Ready to connect machine for the generation of a vacuum and/or overpressure.
The vacuum pump/compressor consists of a compressor part and motor, as well
as other accessories where applicable.
Motor Asynchronous motor for driving the vacuum pump/compressor.
Compressor Mechanical part of the vacuum pump/compressor without motor.
Assembly environment Space in which the vacuum pump/compressor is set up and operated (this may
differ from the suction environment).
Drive control Device for rotation speed control of the vacuum pump/compressor. The drive
control can be mounted close to the motor (wall assembly) or integrated into the
vacuum pump/compressor
Changes in comparison to the previous version
Amendments in comparison to version
02.2014
▪ 2.2 Explanation of the terms and symbols
▪ 5.3.6 Control terminals
Table: Terminal assignment X5 of the standard application card, terminal no. 6
▪ 6.4.1 Start up the integrated drive control
▪ 6.4.2 Commission the drive control wall assembly and replacement
▪ 7.2.1 Explanation of the operating modes
Table: Logic table of fixed frequencies parameter 1,020 deleted
▪ 7.3.1 Basic parameters
Parameter 1,131
Other valid documents
All instructions that describe the use of the drive control and if applicable, further
instructions of all accessory parts used, e.g.
Document number Purpose
— Vacuum pump/compressor operating manual
610.00260.01.010 * Operating manual 2FC4...-1PB OR
610.00260.01.020 * Operating manual 2FC4...-1PN OR
610.00260.01.030 * Operating manual 2FC4...-1SC OR
610.00260.01.040 * Operating manual 2FC4...-1CB
610.00260.01.600 * MMI hand-held unit operating manual
*according to the model option or accessories
Download of 3D files (.stp) for drive control and adapter plates under www.gd-
elmorietschle.com.
To parameterise the drive control, the parameter description is ready to be
downloaded (www.gd-elmorietschle.com). The download contains all necessary
information for correct parameterisation.
2.3
2.4