Commissioning, Notice – Elmo Rietschle 2FC4...-1CB User Manual
Page 31
Commissioning
6
© Gardner Denver Deutschland GmbH
31
/
74
05.2014 · 610.00260.40.000
Commissioning
Safety information for commissioning
WARNING
Risk of injury!
The non-observance of warnings can result in severe bodily injury or sub-
stantial property damage.
1. Make sure that the power supply provides the correct voltage and is designed
for the necessary current.
2. Use suitable circuit breaker with the specified nominal current between the
mains supply and drive controller.
3. Use appropriate fuses with the corresponding current values between the
mains supply and the drive controller (see Technical data [➙ 64]).
4. The drive controller must be correctly earthed to the motor. Not doing so may
result in serious injury.
NOTICE
Risk of damage!
The drive controller can be damaged in the case of non-compliance with
the instructions and destroyed during subsequent handling.
Commissioning may only be carried out by qualified personnel. Safety precau-
tions and warnings must always be observed.
6
6.1