Elmo Rietschle 2FC4...-1CB - Manual (Page 7)

Safety and responsibility 3
© Gardner Denver Deutschland GmbH 7 / 74 05.2014 · 610.00260.40.000
Safety and responsibility
The manufacturer is not liable for damage caused by the failure to observe these
instructions and the related documents [➙ 6].
Explanation of warning signs
Warning sign Explanation
Danger that failure to observe the measures could lead to
death or serious physical injuries.
Danger that failure to observe the measures could lead to
death or serious physical injuries.
Danger that failure to observe the measures could lead to
minor physical injuries.
Danger that failure to observe the measures could lead to
material damage.
Safety instructions
The following warnings, precautionary measures and comments are provided for
your safety and serve to prevent damage to the drive control and the components
connected to it. This chapter contains warnings and information that are generally
applicable when handling drive controls. They are split into general information,
transport and storage, start-up, operation, repairs and dismantling & disposal.
Specific warnings and comments that apply to specific activities can be found at
the start of the appropriate chapters and are repeated and added to at various
critical points in these chapters.
Please read this information carefully as it is provided for your personal safety and
will also prolong the life of the drive control and connected devices.
General information
WARNING
This drive controller carries dangerous voltages and controls rotating me-
chanical parts which may be dangerous!
Disregarding the warnings or failure to follow the instructions contained in
this manual may lead to death, serious bodily injury or substantial property
damage.
 Only qualified personnel should work on this drive controller. These personnel
must be thoroughly familiar with all safety instructions, installation, operation
and maintenance procedures contained in this manual. The smooth and safe
operation of the drive controller depends on proper handling, installation, op-
eration and maintenance.
WARNING
Risk of fire or electric shock!
Improper use, modifications and the use of spare parts and accessories
that are not sold or recommended by the manufacturer of the drive control-
ler can cause fire, electric shock and bodily injury.
 The cooling element of the drive controller and motor can reach temperatures
of above 70°C [158 °F]. During installation, sufficient spacing between adja-
cent components should be maintained. Before working on the drive control-
ler or motor, required cooling time must be ensured. If necessary, a protection
against accidental contact should be installed.
3
3.1
3.2
3.2.1