Avaya 03-300686 - Manual (Page 131)

1151B1 and 1151B2 Power Supplies
Issue 3 January 2008 131
Connecting the cables
To connect IP telephones, PCs, servers, routers, workstations, and hubs.
1. Connect the Ethernet connection cable (not supplied) to a 10/100 megabits per second port
on the front panel of the Avaya C360 series switch.
Note:
Note:
Use standard RJ45 connections and a CAT5 cable for 100 megabits per second
operation.
2. Connect the other end of the cable to the Ethernet port of the PC, server, router,
workstation, IP telephone, switch, or hub.
3. Check that the appropriate link (LNK) LEDs light up.
1151B1 and 1151B2 Power Supplies
The 1151B1 and 1151B2 power supplies are a local power supply. The telephones or consoles
connect directly to them through an RJ45 connector. The 1151B2 has a battery backup.
These power supplies comply with the Underwriters Laboratories Inc. (UL) Standard UL
60950 third edition.
For safety instructions, see Important safety instructions for 1151B1 and 1151B2 Power
Supplies on page 132. For installation instructions, see Connecting the 1151B1 or 1151B2
Power Supplies on page 133.
Complies UL 60950
Certified CSA C22.2
Approved EN
Approved CE Regulatory Compliance