Avaya 03-300686 - Manual (Page 62)

MDF connections to stations and the public switched telephone network
62 Installing and Connecting the MDF and Telephones
Installing and administering the patch cord/jumper
Before starting the patch cord installation, obtain a copy of the Port Assignment Record forms
from the customer or marketing representative. See
Figure 25: Port Assignment Record
Form on page 53.
The white label identifying the terminal block row associated with circuits 17 to 24 connects to
an identically labeled terminal block row at the satellite closet. See
Figure 29: Example 3-pair
labeling to information outlet on page 63. This is always the case for either 1-point or 2-point
administration.
The satellite symbol must be installed at all connection points between the blue field and the
information outlet. It must also be installed at the information outlet itself.
Figure 30: Example 4-pair labeling to information outlet on page 64 shows an example labeling
scheme for 4-pair circuits from the equipment room to the information outlets. The labeling
scheme for 3-pair circuits from the MDF to a satellite location.